23
For any help concerning set up and use of your TV please call the
Customer Helpline: 0871 2000 463
IMPORTANT – Before connecting the computer to the television you must ensure the computer settings are correct
for the television. You MUST do this using your old monitor.
1)
Switch on your computer
2)
When fi nished booting up right click your
mouse anywhere on the screen
4)
Left click your mouse on Setting/Display Settings.
Ensure the screen resolution is set to what is shown
in the technical specifi cations section toward the rear
of this user guide. To correct the resolution to that of
the television move the slider.
6)
Left click on the drop down for Screen refresh rate and select 60 Hertz, if you experience picture noise or
‘fl ickering’, select 50 hertz or 70 hertz.
7)
Click on Apply, then click Yes and the settings will be saved.
8)
Now switch off your computer and connect
the television (as shown)
9)
Switch on the TV, select the input/source
to VGA/PC and re-start your PC.
Connecting a Laptop
In addition to the above if you are connecting a laptop to the television you will also need to activate the VGA
connection on the laptop. This can vary based on the brand of laptop you have, on many brands/models, it is as
per below.
1)
Connect the laptop to the television
2)
On the Laptop push buttons
The screen will now switch to the television.
3)
Left click your mouse on Properties/Personalise
5)
Left click your mouse on Advance/Advanced
Settings and left click on Monitor
Using The Television As A Computer Monitor
How to set up for Windows XP & Windows Vista (connecting via VGA cable to the TV)
UserGuide - Bush -42-191F3D.indd Sec1:23
UserGuide - Bush -42-191F3D.indd Sec1:23
9/2/2013 3:30:16 PM
9/2/2013 3:30:16 PM
