Bush 4023856, Instruction Manual

Page: 5 / 24

5
Check the package contents
The package contains:
•
1 x Stereo DAB/FM Radio
• 1 x mains lead and plug
• 1 x instruction manual
Where to put your Radio
It is important that you consider carefully in advance where your Radio will be situated
and make sure that it is:
•
on a flat and stable surface
• Note: Never place your Radio directly onto antique or polished surfaces.
• within 1.4 metres of a power socket (if using mains power). Please ensure that the
mains power lead is not a trip hazard.
• at least 1 metre away from other electrical appliances to avoid interference
• where you can fully extend the telescopic aerial
• away from bright sunlight or heat sources, such as a radiator
• not in a humid or very damp place such as a bathroom
Setting up
1. Connect the mains power lead into the socket on the back of the Radio and fully
extend the radio aerial in a vertical position to obtain the maximum signal strength.
2. Plug the power adaptor into the mains power wall socket and switch on.
3. The display will light up and ‘Welcome to Digital Radio’ will be displayed.
4. Press and releases the ‘Power’ button on the front of the radio. The first time you
switch your radio on it will automatically begin to scan for DAB radio stations. A
progress bar will show the progress of the scan and the number of stations found
during the scan will also be displayed.
When the scan is complete your radio will select the first available station and
begin to play. Stations are listed in numerical and then alphabetical order by
default.
Note: The DAB radio station list is stored in the memory and so the next time you
switch your radio on, the station search does not take place. It is possible to scan
manually for stations. Please see page 9.
5. Inserting the batteries (optional). Before installing the batteries (not included)
please ensure that the Radio is switched off and is unplugged from the mains
power supply.
Product Set Up