Bush 4023856, Instruction Manual

Page: 10 / 24

10
Prune DAB stations
You can remove the DAB stations in the station list that cannot be received in your
area. These are listed with a ‘?’ prefix.
1. Press and release the ‘Menu’ button and use the ‘Tune/Select’ rotary control to
scroll to ‘<Prune>’. Press and release the rotary control to ‘Select’.
2. ‘Prune? <No> Yes’ is displayed. Use the rotary control to scroll to ‘Yes’. Press the
rotary control to ‘Select’ and prune the station list. Stations with a ‘?’ prefix will
now no longer be displayed. Press and release the ‘Menu’ button to return to the
station display.
Storing a DAB station preset
Your Radio can store up to 30 DAB radio stations in its preset memories for instant
access to your favourite stations.
1. Tune the Radio to the DAB radio station that you wish to preset.
2. Press and hold the ‘Preset’ button for approximately 2 seconds until ‘Preset store’ is
displayed.
3. Use the ‘Tune/Select’ rotary control button to scroll to the preset location that you
would like to store the radio station to (1-30).
4. Press the rotary control to ‘Select’, the display will confirm ‘Preset X stored’, where
‘X’ is the number of the preset (1-30).
Note: If there is already an existing DAB station stored under a preset, it will be over
written when you store the new station.
Tune to a DAB station preset
In DAB mode:
1. Press and release the ‘Preset’ button. ‘Preset Recall’ is displayed together with the
number of the current preset location.
2. Use the ‘Tune/Select’ rotary control to scroll to the Preset location and station that
you would like to listen to (1-30). Press the rotary control to ‘Select.’ The radio will
instantly tune to that station and begin to play.
Note: If no DAB station has been stored under the preset button, ‘Preset Empty’ will be
displayed, then the radio will revert to the previously selected radio station after a few
seconds.