Bush 311010, Instruction Manual

Page: 14 / 32

Getting to know your LED Speaker
You’ll be up and running in no time
Getting to know your LED Speaker
14
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Connecting or ‘Pairing’ with your LED Speaker
Check that your LED Speaker is in Bluetooth mode. If you are not already in Bluetooth
mode, press and release the M button until you are in Bluetooth mode.
1.
The small blue LED on the top of the LED Speaker will flash.
2. On the device that you would like to connect to your LED Speaker via Bluetooth (e.g.
iPhone/iPad/Android/other phone/Tablet/Computer), turn on Bluetooth connectivity
and ensure that it is ‘discoverable’.
Note: If necessary, refer to the instructions for your device to add or set up Bluetooth.
3. Select to ‘Add new device’, if necessary.
Note:
Some products will automatically search for a new device and so the ‘Add new
device’ option is not available.
4.
When found, your LED Speaker will be displayed as ‘BUSH LED SPEAKER’. Select the
device name to begin pairing.
5. When pairing is complete the small blue LED will stop flashing and will remain
constantly on. The LED Speaker will announce ‘Bluetooth paired’.
6. Now that you have paired your device with the LED Speaker, it will connect to it when
it is within range, which is about 10 metres or less (33 feet or less), line of sight.
7. Your device will remain paired with the LED Speaker unless you decide to disconnect
or ‘unpair’ it..
Adjusting the volume
Press and hold to decrease the volume
Press and hold to increase the volume.