Bush 311010, Instruction Manual

Page: 12 / 32

Getting to know your LED Speaker
12
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
Getting to know your LED Speaker
You’ll be up and running in no time
Power connection
1. Pull out the small cover from the back of the LED Speaker to reveal the On/Off switch,
Micro USB charging socket and Aux in socket.
(Fig 3)
2.
Connect the micro USB end of the charging cable to the USB socket. Plug the
standard end of the USB charging cable into a computer or other USB charging
device.
(Fig 4)
3. The small orange charging LEDs on the top of the LED speaker with light up to
indicate the charging status (25%, 50%, 75% and 100%). When all four charging LEDs
are lit, the battery is fully charged.
Note: It will take approximately 2.5 hours to fully charge your LED Speaker, before first
use.
4. When fully charged, unplug the micro USB charging cable.
Note:
Your LED Speaker has an approximate playtime of 6 hours, before it needs to be
recharged. When the battery power is low, the LED Speaker will announce ‘Battery level
low’, an orange charging LED will flash quickly and the volume of any music playing,
will be decreased automatically at the same time. You should plug in and recharge
your LED Speaker straight away.
Fig 3. Fig 4.
Cover