Bush 134082072, Instruction Manual, Page: 14 / 32

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting section of these instructions
14
Installing your vacuum
Bringing it all together
Assembly
1. Insert the flexible hose coupling into the hose socket and push to
secure, a click will be heard.
2. Fit the extension tube onto the end of the curved handle and push fit
the floor head onto the extension tube (fig.1). The crevice nozzle can
fit onto the curved handle and the extension tube in a similar manner.
3. To adjust the length of the extension tube, press the extension tube
button and pull out the inner tube to the required length.
4. To remove the extension tube and accessories firmly pull apart.
5. To disconnect the flexible hose from the body of the cleaner ensure
that vacuum cleaner is switched off. Squeeze the hose release button
and pull apart.
Fig. 1
Handle
Extension tube button
Hose coupling Hose release button