Bush-whacker ST-6010, Operator'S Manual

Page: 54 / 58

54
2010 ST-6010 & ST-7210
HALL MANUFACTURING WARRANTY POLICY FOR BUSH-WHACKER ROTARY MOWERS
DISCLAIMER OF IMPLIED WARRANTIES & CONSEQUENTIAL DAMAGES
Hall Manufacturing’s obligation under this limited warranty, to the extent allowed by law, is in lieu of all warranties,
Implied or expressed,
INCLUDING IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE
and any liability for incidental and consequential damages with respect to the sale or use
of the equipment warranted. Such incidental and consequential damages shall include but not limited to: transportation
charges loss of income; rental of substitute equipment, and expenses due to loss, damage, detention or delay in the deliv-
ery of equipment or parts resulting from acts beyond the control of Hall Manufacturing.
IMPROVEMENTS OR CHANGES
Hall Manufacturing reserves the right to make improvements of changes in design and specification at any time without
incurring any obligation to owners of units previously sold.
WARRANTY CLAIMS PROCEDURE
Warranty claims must be delivered to Hall Manufacturing within thirty (30) days after the warranty service work was
performed.
Hall Manufacturing will approved or deny claim within thirty (30) days of receiving a claim.
Hall Manufacturing will issue credit for all genuine Bush-Whacker parts or components as well as all approved
Dealership employee labor time at a rate of $30.00 per hour within thirty (30) days of the claim approval.
Defective parts must be held for inspection for ninety (90) days after the work is performed. Hall Manufacturing
may request that parts be returned to the Hall Manufacturing factory for inspection.
ACKNOWLEDGEMENT REQUIRED
Hall Manufacturing shall have no obligation under this warranty unless the Owner Registration Card, included with your
Operators Manual, is signed by Owner and Dealer or Dealer’s Agent and is delivered along with a copy of the original
Bill of Sale from the Dealer to Hall Manufacturing within sixty (60) days from the date of sale.
─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─ ─
COMPLETE THE WARRANTY REGISTRATION CARD
(ON THE FOLLOWING PAGE)
PLACE IN AN ENVELOPE ALONG WITH THE ORIGINAL BILL OF SALE
MAIL TO:
HALL MANUFACTURING, INC.
P. O. BOX 5638
NORTH LITTLE ROCK, AR 72119