Bush-whacker SSM-72, Operator'S Manual / Parts Book

Page: 10 / 29

10
2017 SSM-72
Safety Warnings
Hydraulics
Relieve all pressure in the hydraulic lines by setting the mower deck on the
ground, shutting the skid-steer off, and actuating lift valve handles before
disconnecting hoses. This relief of pressure will reduce possibility of serious
injury from spewing hydraulic fluid
.
Frayed, torn, or crimped hoses may rupture and spray boiling oil onto
Operator and cause serious bodily injury from scalding.
Failure to inspect and repair or replace hoses may cause worn hoses
to
rupture suddenly and violently resulting in serious bodily injury
from scalding or fire with resulting burn injury or death.
Inspect hoses daily and repair or replace when needed . Stop all leaks.
Repair or replace hoses as indicated to prevent unexpected failure and
possible serious injury to operator or bystander.
Boiling oil may spray onto hot parts and catch fire causing severe burn injury or death.
Use paper or cardboard to check for leaks . Never use your hand.
If oil penetrates skin , gangrene or other serious injury could occur.
If skin is penetrated by hydraulic fluid, get immediate medical
attention
.
Under no circumstances should any adjustments be made to the hydraulic system on the
cutter. Adjustments could result in severe injury or death!
* Hydraulic system flow rate is preset at 18 or 25 gpm and is non-adjustable
*Hydraulic relief valve set at 3000 psi and should not be adjusted
*If flow valve requires service, contact Bush-Whacker for factory authorized replacement parts
*******Under no circumstances should the hydraulic flow valve be adjusted. Changing
relief valve pressure could damage equipment and result in severe injury or death*******