Bush Hog HDTH8 Operator'S Manual Download Page 93

Page: 93 / 172

The HDTH models are shipped from the factory partially assembled on shipping stands allowing

the machine to be shipped in a vertical position. The shipping stands attached to the front of

the machines must be removed prior to the assembly process.

Do not attempt to remove the shipping stands with the machine in the vertical

position.

PREPARING TO ASSEMBLE

1. With the aid of a overhead winch or a fork lift, lower the cutter to the ground so that it is rest-

ing securely on a firm flat surface.

2. Remove Shipping Stands.

3. Remove the Driveshaft, Mast Halves and Mast Supports from the machine.

4. Remove the Bag of Parts from under the shielding.

5. Leave the Caster Wheels in the shipping position at this time.

HDTH 8 Finish Mower 09/20

Assembly Section 3-3

ASSEMBLY

ASSEMBL

Figure 3-1

HDTH

as shipped in

vertical position.

Mast Supports

Driveshaft Assembly

Mast Halves

Shipping Stand

Bag of parts Located
under shield

Caster Wheels

Summary of Contents for HDTH8













































































































































































Search results

Summary of Contents for HDTH8

Reviews:

Bush Hog HDTH8, Operator'S Manual, Page: 93 / 172

Search results

Summary of Contents for HDTH8

Reviews: