Bush Hog BSR Series, Operator'S Manual, Page: 53 / 96

OPERATION
BSR Series Rakes 03/14 Operation Section 4-9
© 2014 Alamo Group Inc.
OPERA
T
ION
6.2 Attaching Rake to Tractor Drawbar
1. Tractor Drawbar has been attached.
2. Remove hitch pin.
3. Back up tractor to rake. Align hitch pin holes in
tractor drawbar and rake tongue.
4. Engage tractor parking brake and/or place
transmission in “Park”.
5. Shut off tractor engine and remove key.
6. Install hitch pin (A). Fasten with quick -lock pin.
7. Raise jackstand (B) and fasten with pin (C).
A safety chain will help control drawn equipment should it accidentally separate from the
drawbar. A runaway machine could cause severe injury or death to someone. Provide only
enough slack in chain to permit turning, Do not use safety chain for towing.
8. Connect chain (D) to rake tongue., Route chain
through loop on drawbar and connect to tractor
drawbar support, Do not fasten to drawbar,
Remove all slack except what is needed for
turns.
IMPORTANT: Scan this QR Code with your smart phone to link to the PAMI Safe
Implement Hitching Manual for more information on correctly connecting
agricultural tractors to implements. Or type in your internet browser the following
web address: www.algqr.com/hme
Ops-0008-MISC