manualshive.com logo in svg

Bush Hog 2547, Operator'S Manual

The Bush Hog 2547 Operator's Manual is essential for proper operation of this powerful machine. Download the manual for free from our website to learn how to safely and efficiently use your Bush Hog 2547. Get the most out of your equipment with the user-friendly manual.

Share
Download
background image

MAINTENANCE

2547   01/11

Maintenance Section 5-4

© 2011 Alamo Group Inc.

MAINTENANCE

Lubrication Schedule

Before operating your Loader, take the time to inspect and repair any damage to the machine or tractor. Only a
minimum of time and effort is required to regularly maintain this machine to provide long life and trouble free
operation.

Lubricate all grease fittings: one at each end of lift boom arms and one at rod and base ends of each lift and
bucket cylinders.

NOTE: Fully retract bucket to a comfortable height to grease bucket/loader boom joint. Do not reach or stand
under a raised loader or attachment without proper support.

Summary of Contents for 2547













































































































Reviews:

No comments

Related manuals for 2547

RAMROD ESTATE 500 Operator'S Manual preview
ESTATE 500
Brand: RAMROD Pages: 36
jcb 4CX AEC - POLE MASTER PLUS Operator'S Manual preview
4CX AEC - POLE MASTER PLUS
Brand: jcb Pages: 11
Toro 22327 Operator'S Manual preview
22327
Brand: Toro Pages: 60
Wacker Neuson 8009640011 Operation & Maintenance Manual preview
8009640011
Brand: Wacker Neuson Pages: 64

Brands by name

Popular brands

Load more brands