![background image](http://html1.mh-extra.com/html/bush-hog/1945/1945_operators-manual_2834544090.webp)
OPERATION
1945 01/11
Operation Section 4-44
© 2011 Alamo Group Inc.
OPERA
T
ION
PROBLEM
POSSIBLE CAUSE
REMEDY
Insufficient lift capacity
Load is greater than boom
Check loader specifications.
lift capacity.
Improper hydraulic pump
Repair or replace pump.
operation.
Internal lift cylinder leakage.
Replace any worn parts and install
a seal repair kit. See “Cylinder
Service”.
Improper hydraulic valve
Repair or replace valve.
operation.
Excessive wear on bucket
Bucket is riding on cutting
Use boom “FLOAT” position or
cutting edge
edge instead of wear runners.
bucket level indicator to ensure
bucket rides
Bucket cutting edge not
Rear axle on tractor not level
With tractor on level surface,
flat on theground.
from side to side
compare rear axle height from left to
right, measuring from axle center
toground. Adjust air pressure in rear
tires until axle height measures the
same for both sides.
Summary of Contents for 1945
