background image

Safety | 1

Instruction Manual R5 KB_KC 0020 D_EN_en

3 / 24

1

Safety

Prior to handling the machine, this instruction manual should be read and understood. If
anything needs to be clarified, please contact your Busch representative.

Read this manual carefully before use and keep for future reference.

This instruction manual remains valid as long as the customer does not change anything
on the product.

The machine is intended for industrial use. It must be handled only by technically trained
personnel.

Always wear appropriate personal protective equipment in accordance with the local
regulations.

The machine has been designed and manufactured according to state-of-the-art 
methods. Nevertheless, residual risks may remain. This instruction manual highlights 
potential hazards where appropriate. Safety notes and warning messages are tagged
with one of the keywords DANGER, WARNING, CAUTION, NOTICE and NOTE as 
follows:

DANGER

... indicates an imminent dangerous situation that will result in death or serious injuries if
not prevented.

WARNING

... indicates a potentially dangerous situation that could result in death or serious injuries.

CAUTION

... indicates a potentially dangerous situation that could result in minor injuries.

NOTICE

... indicates a potentially dangerous situation that could result in damage to property.

NOTE

... indicates helpful tips and recommendations, as well as information for efficient and
trouble-free operation.

Summary of Contents for R5 KB 0020 D

























Reviews: