BUSCH Mink MM 1200 AV Installation And Operating Instructions Manual Download

Page: 13 / 16

Spare Parts

Note

: When ordering spare parts or accessories acc. to the table below

please always quote the type and the serial no. of the vacuum pump.
This will allow Busch service to check if the vacuum pump is compati-
ble with a modified or improved part.

The exclusive use of genuine spare parts and consumables is a pre-
requisite for the proper function of the vacuum pump and for the
granting of warranty, guarantee or goodwill.

Your point of contact for service and spare parts in the United
Kingdom:

Busch (UK) Ltd.
Hortonwood 30-35
Telford
Shropshire
TF1 7YB
Tel:

01952 677 432

Fax:

01952 677 423

Your point of contact for service and spare parts in Ireland:

Busch Ireland Ltd.
A10-11 Howth Junction Business Centre
Kilbarrack, Dublin 5
Tel:

+353 (0)1 8321466

Fax:

+353 (0)1 8321470

Your point of contact for service and spare parts in the USA:

Busch lnc.
516-B Viking Drive
Virginia Beach, VA 23452
Tel:

1-800-USA-PUMP (872-7867)

Your point of contact for service and spare parts in Canada:

Busch Vacuum Technics Inc.
1740, Boulevard Lionel Bertrand
Boisbriand (Montréal)
Québec J7H 1N7
Tel:

450 435 6899

Fax:

450 430 5132

Your point of contact for service and spare parts in Australia:

Busch Australia Pty. Ltd.
30 Lakeside Drive
Broadmeadows, Vic. 3047
Tel:

(03) 93 55 06 00

Fax:

(03) 93 55 06 99

Your point of contact for service and spare parts in New Zealand:

Busch New Zealand Ltd.
Unit D, Arrenway Drive
Albany, Auckland 1311
P O Box 302696
North Harbour, Auckland 1330
Tel:

0-9-414 7782

Fax:

0-9-414 7783

Find the list of Busch companies all over the world (by the time of the
publication of these installation and operating instructions) on

page 16 (rear cover page).

Find the up-to-date list of Busch companies and agencies all over the
world on the internet at

www.busch-vacuum.com

Pos.

Part

Qty

Part no.

Venting valve (=oil fill plug)

with seal ring

0543 107 407

Sight glass

0583 000 001

Seal ring for sight glass

0480 000 271

Plug with magnet and seal ring

0415 134 870

Seal ring for plug with magnet

0482 137 352

714

Inlet flange, lower part, with

non-return valve

0916 000 670

715

Screen

0534 000 041

—

Filter cartridge, paper, for inlet

filter (optional)

0532 000 004

—

Filter cartridge, polyester, for

inlet filter (optional)

0532 121 864

Spare Parts Kits

Spare parts kit

Part no.

Overhaul kit (incl. set of seals, marking “VT”

and “DT”; insert for flexible coupling for Rotex

only)

0993 134 022

Set of seals (marking “DT”)

0990 134 021

Accessories

Accessories

Description

Part no.

Inlet air filter

inlet-side, horizontal,

with paper cartridge, to

separate solids

0945 000 071

Oil

Denomination

BP Enersyn HTX 220

ISO-VG

220

Base

PAO

Density [g/cm

]

0.869

Kinematic viscosity at 40 °C

[mm

/s]

227

Kinematic viscosity at 100 °C

[mm

/s]

Flashpoint [°C]

270

Pourpoint [°C]

–36

Part no. 1 l packaging

0831 128 556

Filling quantity, approx. [l]

MM 1324, 1202, 1252, 1322, 1200, 1250, 1320 AV

Spare Parts

0870133276 / 070328

page 13

Summary of Contents for Mink MM 1200 AV

















Search results

Summary of Contents for Mink MM 1200 AV

Reviews:

Related manuals for Mink MM 1200 AV

Brands by name

Popular brands

BUSCH Mink MM 1200 AV, Installation And Operating Instructions Manual

Search results

Summary of Contents for Mink MM 1200 AV

Reviews:

Related manuals for Mink MM 1200 AV

Brands by name

Popular brands