BUSCH LM 0530 A Retrofit Instructions Download Page 2

Page: 2 / 24

Table of Contents

2 / 24

Installation and Retrofit Instructions DOLPHIN LM 0530-0800 A, LT 0320-0630

A_EN_en

Table of Contents

1 Safety .......................................................................................................................................3

2 Introduction ..............................................................................................................................3

3 Retrofit Kit Description .............................................................................................................4

3.1 Scope of Delivery ............................................................................................................. 4

3.1.1 Variable-Frequency Drive without Motor............................................................... 4
3.1.2 Variable-Frequency Drive with Motor.................................................................... 5

3.2 Motor Compatibility ......................................................................................................... 8

4 Transport ..................................................................................................................................8

5 Storage .....................................................................................................................................9

6 Installation................................................................................................................................9

6.1 Installation Conditions ...................................................................................................... 9

6.1.1 Variable-Frequency Drive Installation Location ...................................................... 10
6.1.2 Line Protection ...................................................................................................... 10
6.1.3 Ambient Conditions............................................................................................... 10
6.1.4 Preventing Electromagnetic Interferences .............................................................. 11

6.2 Variable-Frequency Drive Installation ............................................................................... 12

6.2.1 Dismantle the Motor Terminal Box ........................................................................ 12
6.2.2 Install Adapter Plate .............................................................................................. 12
6.2.3 Mount Variable-Frequency Drive........................................................................... 13
6.2.4 Connect Variable-Frequency Drive to Motor ......................................................... 14

6.3 Motor & Coupling Installation .......................................................................................... 15
6.4 Electrical Connection ........................................................................................................ 16

7 Commissioning.........................................................................................................................18

8 Troubleshooting .......................................................................................................................19

8.1 LED Flash Codes............................................................................................................... 20

9 Technical Data ..........................................................................................................................21

Summary of Contents for LM 0530 A

























Search results

Summary of Contents for LM 0530 A

Reviews:

Related manuals for LM 0530 A

Brands by name

Popular brands

BUSCH LM 0530 A, Retrofit Instructions

Search results

Summary of Contents for LM 0530 A

Reviews:

Related manuals for LM 0530 A

Brands by name

Popular brands