BUSCH COBRA NC 0630 C, Instruction Manual

Page: 11 / 40

Installation | 5
Instruction Manual COBRA NC 1000 B WCV_EN_en 11 | 40
5 Installation
5.1 Installation Conditions
WARNING
If the machine is installed in a potentially explosive environment or if the machine is used to
draw toxic, inflammable or non-inert gases:
Risk of injuries!
Risk of death!
●
Ensure that the machine complies with all local, national rules and safety regulations.
NOTICE
Use of the machine outside of the permitted installation conditions.
Risk of premature failure!
Loss of efficiency!
●
Take care that the installation conditions are fully complied with.
●
Make sure that the environment of the machine is not potentially explosive.
●
Make sure that the ambient conditions comply with the Technical Data.
●
Make sure that the environmental conditions comply with the protection class of the motor and
the electrical elements.
●
Make sure that the installation space or location is vented such that sufficient cooling of the ma-
chine is provided.
●
Make sure that cooling air inlets and outlets of the motor fan are not covered or obstructed and
that the cooling air flow is not affected adversely in any other way.
●
Make sure that the oil sight glass (OSG) remains easily visible.
●
Make sure that enough space remains for maintenance work.
●
Make sure that the machine is placed or mounted horizontally, a maximum deviation of 1° in any
direction is acceptable.
●
Check the oil level, see Oil Level Inspection [
➔
24].
●
Check the cooling liquid level, see Cooling Liquid Level Inspection [
➔
25].
●
Make sure that the cooling water complies with the requirements, see Cooling Water Connection
[
➔
13].
If the machine is installed at an altitude greater than 1000 meters above sea level:
●
Contact your Busch representative, the motor should be derated or the ambient temperature
limited.
5.2 Connecting Lines / Pipes
●
Remove all protective covers before installation.
●
Make sure that the connection lines cause no stress on the connection of the machine; if neces-
sary use flexible joints.
●
Make sure that the line size of the connection lines over the entire length is at least as large as
the connections of the machine.
In case of long connection lines, it is advisable to use larger line sizes in order to avoid a loss of effi-
ciency. Seek advice from your Busch representative.