BUSCH COBRA ATEX NC 2500 B, Instruction Manual

Page: 37 / 44

Troubleshooting | 11
Instruction Manual COBRA NC 2500 B WCV_EN_en 37 / 44
The machine runs too hot. Insufficient cooling. • Make sure to comply with
the cooling water require-
ments, see
Cooling Wa-
ter Connection [ ► 13] .
Ambient temperature too
high. • Observe the permitted
ambient temperature,
see
Technical Data
[ ► 38] .
Temperature of the process
gases at the inlet too high. • Observe the permitted
gas inlet temperature,
see
Technical Data
[ ► 38] .
The cooling water pump is
defective. • Repair the machine.
Oil level too low. • Top up oil.
The oil is black. Oil change intervals are too
long. • Drain the oil and fill in
new oil, see Oil Change
[ ► 27] .
The machine runs too hot. • See problem "The ma-
chine runs too hot".
For the solution of problems not mentioned in the troubleshooting chart contact your
Busch representative.