background image

Product support

3

5

If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the 

Troubleshooting

 section of these instructions, 

Product support

Help is always at hand

AUTOMATIC FAULT WARNINGS AND WHAT TO DO

The installation and repairing procedures should always carried out by the Authorised Service Agent in order to 
avoid possible risks. The manufacturer shall not be held liable for damages that may arise from procedures 
carried out by unauthorised persons. Repairs may be carried out by technicians only. If a component has to be 
replaced, ensure that only original spare parts are used.Improper repairs or use of non-original spare parts may 
cause considerable damage and put the user at considerable risk.

 

Contact information for your customer 

service can be found on the back of this document. Function-relevant genuine spare parts according to the 
corresponding Ecodesign order can be obtained from Customer Service for a period of at least 10 years from 
the date on which your appliance was placed on the market within the European Economic Area.

TROUBLE 

CODE

POSSIBLE FAULT

WHAT TO DO

F5

Insufficient water

Make sure the water inlet tap is open and 

water is flowing

Separate the inlet hose from the tap and clean 

the filter of the hose.

Contact for service if the error continues.

F3

Continuous water input

Close the tap and contact for service.

F2

Inability to discharge 

water

Water discharge hose and filters may be 

clogged.

Cancel the program.

If the error continues, contact for service.

F8

Heater error

Contact for service.

F1

Overflow

Unplug the machine and close the tap.

Contact for service.

FE

Faulty electronic card

Contact for service.

F7

Overheating

Contact for service.

F9

Divisor position error

Contact for service.

F6

Faulty heater sensor

Contact for service.

Summary of Contents for BFSLSAE9W








































Reviews: