Using your Dishwasher
Getting the most from your appliance
Using your Dishwasher
2
5
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the
Troubleshooting
section of these instructions,
5.1. Preparing your
dishwasher for first use
•
•
Make sure the electricity and supply
water specifications match the
values indicated in the installation
instructions for the machine.
Remove all packaging material
inside the machine.
• Set the water softener level.
• Fill the rinse aid compartment..
5.2 Salt usage (IF AVAILABLE)
For a good washing function, the
dishwasher needs soft, i.e. less calcareous
water. Otherwise, White lime residues will
remain on the dishes and the interior
equipment. This will negatively affect your
machine’s washing, drying and shining
performance. When water flows through
the softener system, the ions forming the
hardness are removed from the water and
the water reaches the softness required to
obtain the best washing result. Depending
on the level of hardness of the inflowing
water, these ions that harden the water
accumulate rapidly inside the softener
system. Therefore, the softener system has
to be refreshed so that it operates with the
same performance also during the next
wash. For this purpose, dishwasher salt is
used.
Machine can only be used by special
dishwasher salt to soften the water. Do not
use any small grained or powdered type of
salts which can easily soluble. Using any
other type of salt can damage your
machine.
5.3. Fill the salt (IF AVAILABLE)
To add softener salt, open the salt
compartment cap by turning it counter
clockwise. (1) (2) At first use, fill the
compartment with 1 kg salt and water (3)
3)
til it is almost overflowing. If available, using
a funnel (4) will make filling easier. Replace
the cap and close it. After every 20-30
Cycles add salt into your machine until it
fills up
(approx. 1 kg).
3
4
1
2
SAL
T
Only add water to the salt
compartment on first use.
Use softener salt specifically produced
for use in dishwashers.
When you start your dishwasher, the
salt compartment is filled with water,
therefore put the softener salt in prior
to starting your machine.
If the softener salt has overflowed
and you do not start the machine
immediately, run a short washing
program to protect your machine
against corrosion.
Summary of Contents for BFSLSAE9W
