Commissioning | 5
0870208958_INVEOR_VFD_-0002_PCI_en
7 / 44
5
Commissioning
5.1 Operate the Remote Control
5.1.1 Key Overview
Confirm buttons
“UP” and “DOWN” buttons
“LEFT” and “RIGHT” buttons
Stop button
Start button
5.1.2 Navigation and Input
Buttons
Function
"UP"/"DOWN" buttons
Selecting parameters, changing values
"LEFT"/"RIGHT" buttons
Navigating cursor
Confirm buttons
With these buttons, the command showed
in the display is activated via the button
"START"/"STOP" buttons
With these buttons, the motor is started or
stopped
Commands
Procedures
Next
Calling up parameters and submenu
Back
One menu level higher
Cancel
End entry without saving
Change
Call up edit mode (cursor blinks)
Save
Save selection, entry or change
Enter
Confirm the selected parameter set
Start
Command for motor detection
Enter
Procedures
Displaying tens, hundreds, thousands place Press "LEFT" arrow until the desired tens,
hundreds or thousands place is displayed
Displaying decimal places
Press "RIGHT" arrow until the desired
decimal places are displayed
Entering negative values
Place cursor on the plus sign, select the
minus sign with the "UP" arrow and save