
Mounting / Installation
| 1473-1-7882
— 7 —
Fig. 3:
4. Remove approximately 5 mm of insulation from the wires.
5. Tin-coat the ends of the wires with a soldering iron. Or 0.34 mm wire-end sleeves may be used.
Fig. 4:
6. Fix the cable with a cable tie to the strain relief of the support web (1).
7. Insert the wires and the shielding according to their markings into their respective positions.
The cable is now installed.
Pos: 25 /Busch-Jaeger (Neustruktur)/Modul-Struktur/Online-Dokumentation/Steuermodule - Online-Dokumentation (--> Für alle Dokumente <--)/++++++++++++ Seitenu+++++++++++ @ 9\mod_1268898668093_0.docx @ 52149 @ @ 1