10
10
Installation
Installation
PWR/LSP/LINE OUT
Step 1:
The power supply of the hands-free car kit is established via a 4-core cable. Connect the black (clamp 31 – mi
-
nus), the red (clamp 30 – steady plus) and the blue cable (clamp 15 – ignition plus) to the power supply of your
radio (where required via the cigarette lighter or the fuse box). After connection to the counterpart, the yellow
cable provides for radio muting during a phone conversation.
Attention:
If you also connect the blue cable to clamp 30 (steady positive), the HFCK will be permanently
X
supplied with power. If the vehicle is not running for a longer period, this could lead to a discharge
of the car battery.
If you deviate from the specified connection descriptions it may be the case that certain func
-
X
tions on the HFCK (e.g. the on-call duty) will not function correctly.
Step 2:
Installation instructions for the fuses (see picture)
6
Please cut through the red and the blue cable
between quick release couplings and cable ends by means of
a wire cutter or scissors. Now insert the two endings of the red cable resulting from the cut into one of the bind
-
ers, then close it. If you hear two clicking noises, the clamp snapped in properly. Now insert one of the fuses
and then repeat the procedure with the other cable.
Step 3:
Please connect an external speaker to the connection harness’ socket (B) with the Jack plug.
Summary of Contents for Molex
Page 2: ......
