9
of 24
2.4 Personnel
Personnel must be familiar with the relevant regulations. They must follow these regulations. Only trained
personnel who are familiar with the applicable safety regulations are permitted to operate the model 8524
tension and compression load cell.
2.5 Contents of pack
•
Tension and compression load cell, model 8524
•
Test certificate
2.6 Unpacking
CAUTION
Never switch on the model 8524 tension and compression load cell if it shows signs
of damage incurred in transit. Only ever use the model 8524 tension and
compression load cell under the conditions specified in this operating manual.
Inspect the model 8524 tension and compression load cell for damage. If you suspect that the unit has
been damaged during shipping, notify the delivery company within 72 hours.
The packaging should be retained by a representative of the manufacturer and/or the delivery company.
The model 8524 tension and compression load cell should be shipped only in its original packaging or in
packaging capable of providing an equivalent degree of protection.
2.7 Warranty
burster präzisionsmesstechnik gmbh & co kg provides a manufacturer’s warranty for a period of
24 months after delivery.
Any repairs required during this time will be made without charge. This does not include damage arising
from improper use.
Please note the following when sending the model 8524 tension and compression load cell in for repair:
•
If there is a problem with the sensor, please attach a note to the body of the device
summarizing the fault.
•
Technical specifications subject to change at any time without notice.
We also state explicitly that we do not accept liability for consequential damage.
•
The instrument must always be dispatched in suitable packaging.
2.8 Maintenance
2.8.1 Recalibration
The model 8524 tension and compression load cell should be recalibrated by the manufacturer after no
more than 12 months.
Note:
If the model 8524 tension and compression load cell is used in machines with high cycle rates,
recalibration should be carried out sooner.
Summary of Contents for 8524
Page 3: ...3of 24...
