11
INSTALLATION (
Continued)
WARNING: Heat shield must be installed.
7. Place heat shield on the retaining brackets in the
center of the fire ring (see Figure 12).
8. Place 4 burner retaining brackets (shorter of the
2 types of brackets included with the MFRB
Series burner system) on the top layer of blocks
in the pattern shown in Figure 13.
9. Connect incoming gas line to regulator shown
in Figure 5 page 8 before placing burner system
into place.
10.
Place burner system on the retainer
brackets in the center of the fire ring with the
controls going through the opening in the blocks
(see Figure 14). DO NOT GRASP BURNER
SYSTEM BY BURNER TUBES.
11. Place lava retaining bracket as shown in
Figure 15.
Figure 14 - Burner System
Summary of Contents for BOFP-48NG
Page 8: ...8 ...
Page 12: ...12 ...
Page 22: ...22 PARTS BURNER MODELS BOFP 48NG BOFP 48P ...
Page 24: ...24 PARTS ...
