BURNHARD FRED DELUXE, Manual

Page: 57 / 60

57
Problem Possible cause Solution
Burner does not ignite
Gas cylinder is empty Connect new gas cylinder
Faulty pressure regulator
Have the pressure regulator
checked by a specialist dealer
Impurities in the burner Clean the burner
Impurities in the ignition system or
gas hose
Clean the ignition and gas hose
No ignition spark Replace the piezo ignition
Nozzle defective (if the burners
still do not ignite despite the
previous recommendations)
Please contact our customer
service to obtain a replacement
Small flame or deflagration
in the burner (crackling or
hissing noise)
Impurities in the burner Clean the ignition and gas hose
The burner is not positioned
correctly Remove the burner and
reposition it
TROUBLESHOOTING
REPLACING THE STAINLESS-STEEL BURNERS
If one or more burners are defective, replace the affected burner(s) as follows:
1. Remove the clamping spring. Pull the burner back slightly and carefully lift out the corresponding
burner.
2. Clean or replace the defective burner(s). Put the burners back in the reverse order and secure the burn-
ers with the clamping spring.