BURNHARD 944726, Manual

Page: 50 / 60

50
Diameter
Hei
gh
t
PERMITTED GAS CYLINDER SIZES
Gas cylinder sizes that may be operated
and stored on the grill base within the cylinder
compartment are:
5 kg (height 420 mm, diameter 200 mm)
8 kg (height 505 mm, diameter 229 mm)
11 kg (height 600 mm, diameter 300 mm)
1. Screw the coupling nut on the end of the hose onto the screw thread on the gas connection on the
gas grill. Use a spanner to tighten the coupling nut.
2. Place the gas cylinder in the trolley.
3. Screw the coupling nut of the hose onto the fitting on the pressure regulator and tighten the connec-
tion with a spanner.
4. Screw the coupling nut on the pressure regulator onto the screw connection on the gas cylinder. Tigh-
ten the coupling nut with your hand. To prevent damage to the seal, don’t use tools.
WARNING: Fire and explosion hazard due to damage to the gas hose.
When placing the gas hose, ensure that the following requirements are met:
• The gas hose does not touch any hot surfaces.
• The gas hose does not run along sharp edges and corners.
• No hot grease can drip onto the gas hose.
• The gas hose is not twisted or kinked at any point.