The Contractors Choice
thermOweld
®
ECN 2552 REV "E" 03/06/13 34-5381-81
+1 (918) 627-5210 • 1-800-558-1373 • WWW.THERMOWELD.COM
ELECTRICAL GROUNDING • CATHODIC PROTECTION • ELECTRIC UTILITY • RAIL
Tel. +1.800.558.1373
Tel. +1.918.627.5210
www.thermoweld.com
INSTRUCTIONS FOR THERMOWELD GROUNDING CONNECTIONS - CABLE TO RAIL
HAMMER DIE
PK-17 MOLD
TYPE CX-5 MOLDS
1. See reverse side for preparation of cable and
rail surfaces.
2. Place sleeve on the end of the cable allowing
cable to extend past end of sleeve 1/8" and
place into the hammer die.
3. Strike the lid of the hammer die with a hammer
to form the end of the cable.
4. Insert formed end of the cable into the mold,
making sure the end of the cable is to the
center of the tap hole.
5. Follow instruction on reverse side of this sheet
for welding instructions.
PK-3 MOLD
