Strana 17 z 19
● Insert the hex wrench (size 5) into the hexagonal screw bolt on the grinding block (Fig.5)
● Hold the grinding pad firmly, and then turn the wrench to dismount the pad.
● Installation of new grinding pad by tightening the bolt (Fig.5).
Attention: Only install the specified grinding pad on the machine.
In order to ensure optimal performance, machine should be run at slightly lower speed for
several minutes to make the grinding pad fit the sealing surface perfectly. During this process,
the white foam particles will come out from the grinding head. However, this won’t damage the
machine.
6.4 Two Options For Extracting Dust
There are internal extraction [6-1] and external extraction [6-2] for dust particles. The 8-hole internal extraction
system collects fine dust particles, enabling to adhere to wall and ceiling, obtaining perfect effect of extracting
dust.
6.6
Connect to
Vacuum Cleaner
Inhalation of dust is hazardous to health! When carrying out the work which can produce dust, please always
wear a dust mask.
● Loose the fastening nut.
●Connect the hose to the exit of the handle(Fig.7)
●The other end of the hose is connected to the vacuum cleaner;
