- 16 -
around the burner area and fuel effects with a HEPA filtered vacuum with brush attachment. Using
the relevant section from the installers manual refit the fuel effects, glass and case.
On no account should the fire be used with glass removed. The fuel effects must not be replaced
in a different position from the instructions, if they are broken replace immediately. Do not use
additional or non standard fuel effects as to do so could cause a hazard.
If the fire is equipped with a remote control then check and change the batteries as described in
previously.
The fire should also be serviced annually by a competent person: Gas Safe ™ registered installer
(formerly CORGI) in the UK. This is best done before the heating season.
NOTES
The first time that the appliance is used, there will be some odour produced due to the newness of
the materials. It is recommended that the unit is fired at maximum setting for several hours and
the room is kept ventilated during this period. It is usual for flueless appliances to produce an
initial odour after start up.
If the pilot flame should ever extinguish of its own accord, ventilate the room and allow a
minimum of 5 minutes before relighting.
Never attempt to relight the unit if there is a gas smell, ventilate the room first.
If the unit continues to extinguish after a period of use, do not use it and seek the advice of your
installer.
GENERAL
To qualify for your free second year guarantee, you must fully complete and return the separate
Guarantee Card. There are sections that your fitter must complete whilst he is fitting the fire. If
the fully completed Guarantee Card is not returned within 7 days of fitting, the appliance is just
covered by the standard 12 month guarantee.
As with all gas appliances, this fire MUST be serviced at least every 12 months, preferably at the
start of the heating season. The second year guarantee is conditional on this service taking place.
Servicing must be carried out by a qualified service engineer.
BURLEY APPLIANCES ARE THE ONLY COMPANY TO BENCH RUN AND THOROUGHLY TEST EVERY
SINGLE GAS FIRE IT PRODUCES. BURLEY ARE IN THE UNIQUE POSITION OF KNOWING THAT
EVERY APPLIANCE LEAVES THE FACTORY IN PERFECT WORKING ORDER.
