Burley BR7173, Manual

Page: 5 / 12

04
WARNING: Shock hazard. Do not allow any liquid to get inside charger. Electric
shock may result.
SAVE THESE INSTRUCTIONS:
This manual contains important safety and
operating instructions for compatible battery chargers (refer to Technical Data).
Before using charger, read all instructions and cautionary markings on charger,
battery pack, and product using battery pack.
WARNING: We recommend the use of a residual current device with a residual
current rating of 30mA or less.
CAUTION :Burn hazard. To reduce the risk of injury, charge only rechargeable
batteries. Other types of batteries may burst causing personal injury and damage.
CAUTION: Children should be supervised to ensure that they do not play with the
appliance.
NOTICE: Under certain conditions, with the charger plugged into the power supply,
the exposed charging contacts inside the charger can be shorted by foreign
material. Foreign materials of a conductive nature such as, but not limited to, steel
wool, aluminum foil or any buildup of metallic particles should be kept away from
charger cavities. Always unplug the charger from the power supply when there is
no battery pack in the cavity. Unplug charger before attempting to clean .
DO NOT attempt to charge the battery pack with any chargers other than the
ones in this manual.
The charger and battery pack are specifically designed to
work together
These chargers are not intended for any uses other than charging rechargeable
batteries.
Any other uses may result in risk of fire,
electric shock or electrocution.
Do not expose charger to rain or snow.
Pull by plug rather than cord when disconnecting charger.
This will reduce risk
of damage to electric plug and cord.
Make sure that cord is located so that it will not be stepped on, tripped over,
or otherwise subjected to damage or stress.
Do not use an extension cord unless it is absolutely necessary.
Use of improper
extension cord could result in risk of fire,electric shock, or electrocution.
5.SERVICE
> Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.