Burley BR7173 Manual Download Page 3

         WARNING! Read all safety warnings and all instructions. Failure to follow the 
warnings and instructions may result in electric shock, fire and/or serious injury. 
Save all warnings and instructions for future reference. The term “power tool” in the 
warnings refers to your mainsoperated (corded) power tool or battery-operated 
(cordless) power tool.

SAFETY

GENERAL SAFETY INSTRUCTIONS

1.WORK AREA SAFETY

> Keep work area clean and well lit. Cluttered or dark areas invite accidents.
> Do not operate power tools in explosive atmospheres, such as in the presence of 
   flammable liquids, gases or dust. Power tools create sparks which may ignite the 
   dust or fumes.
> Keep children and bystanders away while operating a power tool. Distractions can 
   cause you to lose control.

2.ELECTRICAL SAFETY

> Power tool plugs must match the outlet. Never modify the plug in any way. Do not 
   use any adapter plugs with earthed (grounded) power tools.Unmodified plugs and 
   matching outlets will reduce risk of electric shock.
> Avoid body contact with earthed or grounded surfaces such as pipes, radiators, 
   ranges and refrigerators. There is an increased risk of electric shock if your body is 
   earthed or grounded.
> Do not expose power tools to rain or wet conditions.Water entering a power tool 
   will increase the risk of electric shock.
> Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the 
   power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged 
   or entangled cords increase the risk of electric shock.
> When operating a power tool outdoors, use an extension cord suitable for outdoor 
   use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
> If operating a power tool in a damp location is unavoidable, use an earth leakage 
   circuit breaker. Use of an earth leakage circuit breaker reduces the risk of electric 
   shock.

3.PERSONAL SAFETY

> Stay alert, watch what you are doing and use common sense when operating a 
   power tool. Do not use a power tool while you are tired or under the influence of 
   drugs, alcohol or medication. A moment of inattention while operating power 
   tools may result in serious personal injury.

02

Summary of Contents for BR7173













Reviews: