Burks BPLHS Series, Installation And Operation Manual, Page: 7 / 54

7
SECTION: E - Transport
E-1) Transport:
1. Transport the pump in the position as indicated on the
pallet or packaging.
2. Make sure the pump is stable.
3. If present, observe the instructions on the packaging.
IMPORTANT
Lift the pump, if necessary using a hoist and
suitable slings. Attach the slings to
the transport lugs on the packaging, where
present.
IMPORTANT
The pump must be lifted according to the
current hoist guidelines. Only quali fi ed
personnel are allowed to lift the pump.
IMPORTANT
Do not lift the pump by using the frequency
converter (if placed), electrical parts or
the motor cover. Be sure that the pump is
always in balance.
IMPORTANT
All the pumps will turn approximately 2 to 15
degrees. Do not remove the lever or
protection from the pump before the pump is
placed and mounted correctly.
E-2) Storage:
Fill the pump with glycol in order to protect it against the
risk of frost.
Storage
tambient (ºC) -10/40
max. rel. humidity (%) 80% at 20 º C not condensing
E-2.1) Inspection during storage:
1. Turn the shaft every three months and just before
putting into operation.