51
IO-Link
12
IO-LINK
12.1
Information, IO-Link
IO-Link is an internationally standardized IO technology (IEC 61131-9) to enable sensors and actuators to
communicate.
IO-Link is a point-to-point communication with 3-wire connection technology for sensors and actuators and
unshielded standard sensor cables.
To ensure clear communication, the IO-Link devices should not be parameterised simultaneously by the
higher-level controller (PLC) via the IO-Link master and with the Bürkert Communicator (via the communi
-
cation interface).
12.2
Technical specifications, IO-Link
IO-Link specifications V1.1.2
Supply via IO-Link (M12 x 1, 5-pin, A-coded)
Port
Class B
SIO
mode no
IODD file see Internet
VendorID 0x0078, 120
DeviceID see IODD file
ProductID 8696
Transmission speed COM3 (230.4 kbit/s)
PD Input Bits 80
PD Output Bits 40
M-sequence Cap. 0x0D
Min. cycle time 1 ms
Data storage Yes
Max. cable length 20 m
12.2.1
Configuration of the fieldbus
The required start-up files and the description of the process data and acyclic parameters are available on
the Internet.
Download from:
www.burkert.com
/ Type 8696 / Software
english
Type 8696, REV.2
Summary of Contents for 8696
Page 74: ...74 english Type 8696 REV 2...
Page 75: ...www burkert com...
