Bürkert 8311, Instruction Manual, Page: 14 / 128

ENGLISH ENGLISH
Pressure transmitter 8311 4 installation
4.1 General recommendations
Always check the chemical compatibility of the materials the transmitter
is made of with the products it may be in contact with, for instance: alco-
hols, strong or concentrated acids, aldehydes, bases, esters, aliphatics,
aromatics, ketones, aromatics or halogenated hydrocarbons, oxidizing
agents and chlorinated products. For more information, please contact
your Bürkert sales office.
4.2 mounting on the pipe
The pressure transmitter 8311 can be inserted in a fitting before being
mounted on any type of pipe.
During mounting, follow the instructions given with the fitting.
Always replace the cover in its initial position.
The housing can then be rotated by 180°.
Do not tighten the transmitter
using the housing;
use an appropriate tool.
For a G1/2”-version,
ensure the gasket is in
place
do not unscrew
the metallic part
from the pipe
when readjusting
the housing.
ENTER
O
U
T
0....9