Bürkert 2380 Operating Instructions Manual Download Page 4

4

Operatinginstructions

Type 2380

1. 

 OPERATING INSTRUCTIONS

The operating instructions describe the entire life cycle of the device.  
Keep  these  instructions  in  a  location  which  is  easily  accessible  to  
every user and make these instructions available to every new owner 
of the device.

The operating instructions contain important safety information!

Failure to observe these instructions may result in hazardous 
situations.

 

The operating instructions must be read and understood.

1.1. 

Symbols

DANGER!

Warns of an immediate danger!

 

Failure to observe the warning will result in a fatal or serious 

injury.

WARNING!

Warns of a potentially dangerous situation!

 

Failure to observe the warning may result in serious injuries or 

death. 

CAUTION!

Warns of a possible danger!

 

Failure to observe this warning may result in a moderately 

severe or minor injury.

NOTE! 

Warns of damage to property!

 

Failure to observe the warning may result in damage to the 

device or the equipment. 

Indicates important additional information, tips and 

recommendations.

Refers to information in these operating instructions or in 

other documentation

 

  Designates an instruction to prevent risks

 

Designates a procedure which must be carried out

1.2. 

 Definition of term „device“

The term “device” used in these instructions always stands for the 
Bellow Control Valve Type 2380.

english

Summary of Contents for 2380
























Reviews: