8
5.4
Electrical connection of the cable plug
WARNING!
Risk of injury due to electrical shock!
▶
Before reaching into the system, switch off the power supply
and secure to prevent reactivation.
▶
Observe applicable accident prevention and safety regulations
for electrical equipment.
If the protective conductor is not connected, there is a risk of
electric shock!
▶
Always connect protective conductor and check electrical
continuity.
Note the voltage and current type as specified on the label.
Procedure:
→
Tighten cable plug (for permitted types see data sheet), observing
max. torque 1 Nm.
→
Check that seal is fitted correctly.
→
Connect protective conductor and check electrical continuity.
Seal
(ensure position
is correct)
max. 1 Nm
Authorized cable plug
e.g. Type 2508 or other suitable
cable plug in accordance with
DIN EN 175301-803 Form A
english
