3
Risk of injury due to malfunction of valves with alternating
current (AC)!
Sticking core causes coil to overheat, resulting in a malfunction.
▶
Monitor process to ensure function is in perfect working order!
Risk of short-circuit/escape of media through leaking screw joints!
▶
Ensure seals are seated correctly.
▶
Carefully screw valve and connection lines together.
General hazardous situations.
To prevent injury, ensure that:
▶
Do not make any internal or external changes. Ensure that the
system cannot be activated unintentionally.
▶
Installation and repair work may be carried out by authorized
technicians only and with the appropriate tools.
▶
After an interruption in the power supply or pneumatic supply,
ensure that the process is restarted in a defined or controlled
manner.
▶
Do not put any loads on the body.
▶
The general rules of technology apply to application planning
and operation of the device.
3
BASIC SAFETY INSTRUCTIONS
These safety instructions do not make allowance for any contingencies
and events which may arise during installation, operation and
maintenance.
Danger – high pressure!
▶
Before loosening the lines and valves, turn off the pressure and
vent the lines.
Risk of electric shock!
▶
Before reaching into the system, switch off the power supply
and secure to prevent reactivation!
▶
Observe applicable accident prevention and safety regulations
for electrical equipment!
Risk of burns/Risk of fire if used continuously through hot device
surface!
▶
Keep the device away from highly flammable substances and
media and do not touch with bare hands.
english
