ENGLISH
Change of function of DIP switch 8 and actions for customers
Identity-Number:
805038
page
5 of 8
Addendum Type 8644 / ME02 – PROFIBUS-bus terminal
Change of function of DIP switch 8 and actions for customers
Hardware Configuration
Configure the hardware on the PROFIBUS-bus terminal using the 10-pos. DIP switch.
Figure 1: DIP switches of the PROFIBUS-bus terminal
The PROFIBUS address and other PROFIBUS-bus terminal settings can be set using the 10-pos. DIP switch.
The function of the switches can be found in
Table 1
.
Table 1: DIP switch settings on the PROFIBUS-bus terminal as of serial number
37344
DIP Switches
Meaning
1 to 7
PROFIBUS address in binary format ( = 0 – 127 in decimal format):
switch 1 defines the least significant bit (LSB) (2
0
);
switch 7 defines the most significant bit (MSB) (2
6
)
8
Inline station operation mode:
On = New mode with DP/V1 support, failsafe values and parameterisation;
Off = Compatible mode (to PROFIBUS-bus terminal till serial number 37343)
9 to 10
Reserved for service functions;
both switches
must
be in „OFF“ position
