54
Start-up
→
To operate the buttons and DIP switches, for
Version 1:
unscrew the body casing
Version 2:
unscrew the transparent cap
DIP Switches
Key 2
Key 1
LED 2
LED 1
Communications
interface
Version 1
Version 2
1 2 3 4
ON DIP
Key 1
Key 2
LED 1
LED 2
Communications interface
Figure 37:
Automatic adjustment X.TUNE
→
Start the
X.TUNE
by pressing button 1
20)
for 5 s.
While the
X.TUNE
is running, LED 1 flashes quickly (green).
When the automatic adjustment is complete, LED 1 flashes slowly (green)
21)
.
The changes are automatically transferred to the memory (EEPROM) provided the
X.TUNE
function is successful.
important:
When the
X.TUNE
function is activated, the actuator cannot be actuated via the AS-Interface
communication.
Seal
body casing
Body casing
Figure 38:
Position of the seal in the body casing
→
Version 1: Check that the seal is correctly positioned in the body casing.
noTe!
damage or malfunction due to penetration of dirt and humidity!
• To observe protection class IP65 / IP67, screw the transparent cap in all the way.
→
Close the device (assembly tool: 674077
22)
).
20)
The X.TUNE can also be started via communications software.
21)
If a fault occurs, LED 1 is lit red.
22)
The assembly tool (674077) is available from your Bürkert sales office.
English
Type 8694
Summary of Contents for 8694
Page 195: ......
Page 196: ...www burkert com ...