Burkert 8605 Series, Operating Instructions Manual, Page: 23 / 118

23
Configuration
inp (input) - selection of the input signal 9.3.1.
Enter the type of standard signal used in this menu item. You can select between the following standard signals:
0 ... 5 V, •
0 ... 10 V, •
0 ... 20 mA, •
4 ... 20 mA. •
InP (Input) - Selection of the input signal Figure 15:
Out (Output) - Valve settings 9.3.2.
In this menu the electronics are adjusted to
the valve used and •
the fluidic conditions in the application. •
Absolutely vital are
the setting of the valve type in the sub-menu VALV and •
the setting of the working range of the coil current in the sub-menu AdJ. •
The modifications of the PWM control frequencies possible in the sub-menu VAdJ compared with the default
values defined with the selection of the valve type are only necessary in special applications.
english
Type 8605