Ref. “C-8 FLT O&M Manual 26-04-11” Page 4/7
SECTION 2 – HANDLING, STORAGE & OPERATION
2.1 Handling
2.1.1 Configure-8 Flip-Top tables are fitted with castors enabling the tables to be wheeled
around on smooth or carpeted floors.
2.1.2
Where possible the tables should be moved as described above. However, if it necessary
to lift the tables it is recommended that this should be done by two personnel.
•
The tables SHOULD NOT be lifted
by a single person, particularly by
the centre stretcher.
2.1.3
Always use the correct Manual Handling lifting technique – legs bent, back straight, head
up.
•
If the individual feels the task is too much for them alone they should seek
assistance rather than risk injury and / or damaging the table.
2.2 Storage
•
Unless specified, Burgess products are not intended for outside use and must
not be stored in sunlight, rain, dew, or salt air.
2.2.1
For storage Configure-8 Flip-Top tables
should have their tops folded upright, and
be stored “front-to-front” and “back-to-
back” as shown to minimise storage space
requirements
Continued >>