burgbad CRONO M1001, Fitting Instructions Manual

Page: 27 / 198

27
GB
1. Remove pre-assembled panel elements from the package and correspondingly allocate them.
2. Screw magnetic counterparts ( fl at iron bar with two bores) to the tub below the edge with two
screws each.
3. Loosen the fastening screws of the stainless steel plinth panel be approx. ½ rotations so that the
panel can be moved freely in the long holes.
PLEASE NOTE:
The back side of the tub (under the tap panel) is excluded. Two spacer boxes serve for
compensation of the larger overlap of the wider tub edge. Screw two ready-made boxes to the tub
and attach the magnetic counterparts.
Connecting the panel
Attach the panel with the groove slat on the levelling frame and secure it on the top with the
magnets. The stainless steel plinth panel will automatically adjust to the
fl oor by means of the
long holes. Adjust the panel laterally
Front side and norrow side
BATHTUB CRONO 1.0/ INSTALLATION OF BATHTUB PANEL