B-Smart-Lock Keypad | April 2015
English | 4
Optional Functions
Users have the option of adjusting the lock to their
own requirements. There is a series of functions which
can be switched on or off.
Lock Mode
The lock automatically closes after 3 seconds.
Latch Mode
The lock closes only after entering a pin code.
Multi User or Private Code
Decide which mode to use for the lock. Multiple users
can use the lock, which will close with each code that is
entered in the open position. Or you can choose yourself
who is allowed to open the lock by assigning a fixed
code.
Code Length
You can decide whether the code has four or six digits.
This applies for both the multi user as well as the
private code mode. The master code must always,
however, be 6 digits long.
Inputting Verification Code
On the Internet a password must be entered again as
confirmation that you are sure to use this password.
You can also use this function for the multi user mode.
Status Display
If you need to see whether a lock is locked or not
(without turning the knob), you can configure it so a
red LED flashes every second.
Disposal of the B-Smart-Lock Keypad
Electrical equipment may not be disposed
of with household waste! At the end of its
useful life, please take the equipment to a
designated collection point.
BURG F. W. Lüling KG
Hegestraße 6 – 16
D-58300 Wetter (Germany)
Fon + 49 (0) 23 35 / 63 08-0
Fax + 49 (0) 23 35 / 63 08-999
[email protected]
www.burg.de
-SMART-LOCK
-SMART-LOCK
KEYPAD
