B-Smart-Lock Corona
|
March 2017
01- AN/DSW English
ǀ
3
Technical specifications
Dimensions
98 x 66 mm ; 39 mm
Ø
Battery
Lithium battery 3V,
CR123A
Service life:
over 30,000 locking cycles
Radio standard
125 kHz
Programming
Multi user
Private mode
Material
Casing: zamac
Knob: plastic/ silicone
Lock attachment
Wood: screws
Metal: M19 nut
Locking direction
L, R, LAD
Latch
Latch bolt in zinc
(nickel-plated)
Permissible temperature
0°– 40°C
(no formation of
condensation)
Private mode (fixed cabinet assignment)
In this mode, a transponder is permanently assigned to one
lock. Only this transponder is then authorised to close and
open the lock. Up to 50 transponders can be assigned at the
same time. These can also open the lock regardless of
which transponder has locked it.
Automatic locking
Automatic locking can only be set in private mode. This
function automatically closes the lock after a certain time.
Note: Automatic locking cannot be set in multi
-
user mode.
Manual locking
The manual lock secures the lock only when a assigned
transponder is held in front of it. This function can be selec-
ted in private mode as an option. In multi-user mode, it is
the only way of locking.
Signal tones
Signal tones can be turned on or off. If these are activated,
a beep sounds for an unauthorised transponder, as well as
opening and closing operations.
LED-locking status indicator
A red flash every second in the locking indicator indicates
that the lock is engaged. When open, the LED does not
flash. This function is optional and can be turned on or off
as desired.
Functions reset
All functions are reset to the factory settings.
Transponder reset
This function deletes all assigned transponders.
Note: The master card will also be deleted. The program-
ming section describes how to assign the master card again.
Battery warning
If the batteries in the lock do not have sufficient power,
three consecutive beeps decreasing in pitch will sound when
the transponder is held up in front of the lock. Depending on
the frequency of lock use, the batteries must be changed in
the next two to four weeks. When the voltage is particularly
low, the lock can no longer be closed or can only be opened
by the master card. If the batteries are empty, no action
can be performed on the lock.
Functional description
Multi user mode (free cabinet selection)
The lock can be closed by a currently unassigned transpon-
der. Only this transponder is authorised to open the lock
again.
Multi user mode with occupied identifier
The transponder is assigned a busy signal when it has been
used to close a lock. Thus, the transponder cannot close
another lock until it has opened the first lock again.
Mode 1
3 seconds
Mode 2
6 seconds
Mode 3
18 seconds
