Burg Wächter secuENTRY Home ENTRY 5000 CYL Operating Instructions Manual Download Page 1

Page: 1 / 15

www.burg.biz

BURG-WÄCHTER KG

Altenhofer Weg 15

58300 Wetter

Germany

Master Operating Instructions

secuENTRY Home

ENTRY 5000 CYL

Contents index

English

Further languages at:

www.burg.biz

Dear Customer,

Thank you very much for deciding on the secuENTRY 5000 CYL.

The system was developed in Germany according to the most

modern technical capabilities and fulfils the latest high safety

requirements.

The secuENTRY 5000 CYL electronic cylinder can be easily

installed in any door with a profile cylinder lock, up to a door

thickness of 118 mm (59/59 mm, measured in the centre of the

forend screw). No drilling or laying of cables is required and it

is ideally suited for both new installations and retrofitting. The

secuENTRY 5000 CYL can be fitted to house and interior doors.

The secuENTRY 5000 CYL is setup and operated using the free

smartphone app

secuENTRY KeyApp

. The transmission is wire-

less, the cylinder uses the modern Bluetooth 5.2 standard.

Alternatively, the cylinder can also be operated via the PIN keypad

ENTRY 7711

Keypad PIN

or the radio key

ENTRY sE-Key 7713

(both available separately).

The

secuENTRY KeyApp

, however, is always required for the setup.

Important:

Please read the entire operating instructions before you

start the installation.

We hope you enjoy your new locking system!

Foreword

Summary of Contents for secuENTRY Home ENTRY 5000 CYL
















Search results

Summary of Contents for secuENTRY Home ENTRY 5000 CYL

Reviews:

Related manuals for secuENTRY Home ENTRY 5000 CYL

Brands by name

Popular brands

Burg Wächter secuENTRY Home ENTRY 5000 CYL, Operating Instructions Manual

Search results

Summary of Contents for secuENTRY Home ENTRY 5000 CYL

Reviews:

Related manuals for secuENTRY Home ENTRY 5000 CYL

Brands by name

Popular brands