44
|
English
secuENTRY easy
secuENTRY easy plus cylinder assembly
Y easy plus cylinder is explained below.
ead these assembly instructions carefully before installation.
ed from the centre of the forend screw). No prior
opriate screws are included with your set to
ed, the cylinder inner knob is completely closed (to the smallest
e you insert the cylinder into the door, you should
rub screw
otary knob.
f the shaft, as in
onics will be destroyed! The grub screw, which
es the catch on the shaft, may only be loosened slightly and
emains in the plastic knob. The grub screw serves as a
f protection!
e during assembly. Avoid impacts or sudden movements. The lock
eased or oiled.
, proceed as follows:
Rough assessment of door thickness (incl. fittings)
Pull the outer knob off the shaft, move the inner knob over the locking
system (distances 2.85 mm) to the desired dimension.
Inner knob
30 mm adjustment range
Schematic diagram
Internal knob adjustment
Depending on the door thickness, you have the option of fitting adaptors
on the outside to improve the guidance of the emergency key.
All stored fingerprints are deleted; however, the corresponding users are
retained. Please select this menu and follow the instructions on the display in
case of repeated errors related to the use of fingerprints.
Info menu
Using this function, you can have several pieces of information of the
system displayed.
• Switch on the keypad using the key
• Then press
FUNC
; “Menu / Code Change“ appears
• Scroll using the 2 key until “Info menu” appears.
• Confirm with
.
• Using the 1 or 2 key, you can scroll between the following information:
- Version and serial number of the keypad
- Version and serial number of the cylinder
- Operating time of the cylinder
- Opening procedures of the cylinder
- Start-up date and time of the cylinder
Note:
For security reasons, complete information about the cylinder is only
displayed after entering a valid administrator code.
