PointSafe
English
|
3
Opening Safe with User Code
– Press the “enter” button.
– enter the user code.
– Press “enter” again.
The door automatically opens.
Locking the Safe
The door locks automatically when you close the safe door and press
the “close” button.
Attention:
In case the door is blocked by an obstacle, the display
shows “BLOcK”. The safe cannot be closed. remove the obstacle
and repeat your action.
Changing the User Code
enter the existing user code, The door will open and the bolts
will be
retracted.
– Press the “enter” button and “code” will appears on the display.
– enter the new
User code
(3 to 6 digits).
– Press “enter” again and then the “close” button.
The door will lock automatically and user code will be changed.
Incorrect Entries
After 3 incorrect attempts the safe electronics will block the safe for 5
minutes. After this period, the safe can be opened using the correct user
code or Master code. If you type a wrong digit, you can delete your entry
using the “close” button.
Setting the Time
The safe door must be open and the bolts
extended.
– Press the “SeT” button, the hour indicator is flashing.
– Press the “h / M” button till the required hour is indicated
(hour indication: A 1 – 12 = 1 – 12 am, P 1 – 12 = 13 – 24 pm).
– Press the “SeT” button – the minute indicator is flashing.
– Press the “h / M” button again till the required minute is indicated.
– Finally, press the “SeT” button again.
Opening with the Master Code
– Press the “enter” button.
– enter the Master code
(factory set to 12345678).
– Press the “enter” button again.
The display shows “PASS 1” and a 10 second countdown is running. After
this time the user code is displayed briefly and the door automatically opens.
Attention:
In order to close the safe, the user code must be newly
programmed (see “Programming of user code”).
Changing the Master Code
The safe door must be open and the bolts
extended.
– Press the “enter” button.
– enter the Master code (factory set to 12345678).
– Press the “enter” button.
– The display will show “PASS 1” and a 10 second countdown is running.
Press the “enter” button again
during this time.
– Now enter your new Master code (8 digits).
– Press the “enter” button.
– Now enter your new Master code for a second time.
– Finally press the “enter” button.
The display will show “Good” and the Master code will be changed.
Point Safe in Hotel Mode
To change Point Safe from Standard Mode to hotel Mode. The door must be
open
and the bolts
extended.
– Press the “enter” button.
– enter your 8 digit Master code.
– Press “enter” again.
– The display shows “PASS 1” and a 10 second countdown is running.
Press “enter”
during this time.
– enter the code “16805”.
– confirm the change with “enter” (the display shows “SeT-05”)
Point Safe will now be in hotel Mode.
When the door remains open for over 5 minutes, the user code will
now need to be re-entered. If you want to switch back to the Standard
mode, proceed as described above and use the code “16800” at the
corresponding point. The display will show “SeT-00” and you will now
be in Standard Mode.
Disposal of batteries
Dear customer,
please help us to reduce waste. Should you ever intend to dispose of
this device, please bear in mind that many components of the device
contain precious materials, which can be recycled. Please do not dispose
of this device as common waste, but rather request information from the
responsible local authority on the collecting points for electric waste.
The dustbin symbol indicates:
Discharged batteries must not be disposed as common
waste. Please return the batteries to their vendor or
the local recycling yard. Their return is free of charge
and it is legally required.
errors and changes reserved.
