background image

ProfiScale LOCATE 7300

a

b

c

Introduction

Play it safe before you start to drill. The ProfiScale LOCATE M electronic 
multifunction detector will detect everything that lies behind the plaster. 
Locate metal pipes and power cables quickly and easily or track studding  
and cavities. With the aid of visual and acoustic indications, the device tells 
you exactly where it’s safe to drill.

The ProfiScale LOCATE M is a modern detector. It was designed to locate 
metallic objects, wooden beams and live cables in ceilings, floors and walls. 
Use the ProfiScale LOCATE M to minimise the risk of causing damage to live 
cables, metal pipes and objects when drilling.

Illustration

 Display
 Mode
  SELECT button
  On/off button

Display

a

  Wood detection mode

b

  Metal detection mode

c

  Voltage detection mode

Safety instructions

Failure to observe the following instructions may result in personal 
injury:

1.    Before using the device, you must read these instructions carefully to 

ensure that you operate the device safely. Keep these instructions in  
a safe place.

2.   Shielded or live cables in metal cladding, metal walls or thick walls 

cannot be detected. In this case, you can use the metal detection mode 
to take readings.

3.   Proceed with caution when hammering nails, cutting or drilling into 

walls, ceilings or floors containing cables or pipes close to the surface. 

4.   The device’s detection capability may vary due to the humidity of the 

material, composition of the wall, its coating and the size of the object 
to be detected. This can lead to a reduction in detection depth.

5.    Do not use the device to find cables whose voltage lies outside the 

specified voltage range.

6.  Before using the device, check that it is working properly.
7.   If you obtain unclear readings, you should, if possible, choose another 

location to drill, screw etc. If in doubt, seek expert advice.

8.  Keep the device away from children and unauthorized persons.
9.   For safety reasons and to preserve the warranty on the device, repairs 

to the measuring device must only be carried out by qualified personnel 
using genuine parts.

EXTRA

9V

+

+

Summary of Contents for LOCATE PS 7300

Page 1: ...a b c LOCATE PS 7300 www burg biz BURG WÄCHTER KG Altenhofer Weg 15 58300 Wetter Germany ProfiScale LOCATE M Multifunction detector en Operating instructions LOCATE M 50mm 50mm 30mm BA Locate M 04 2016 ...

Page 2: ...uctions carefully to ensure that you operate the device safely Keep these instructions in a safe place 2 Shielded or live cables in metal cladding metal walls or thick walls cannot be detected In this case you can use the metal detection mode to take readings 3 Proceed with caution when hammering nails cutting or drilling into walls ceilings or floors containing cables or pipes close to the surfac...

Page 3: ...rt tones sound to indicate that the device is calibrated If the display flashes you must recalibrate the device at another location Move the device across the wall applying a consistent contact pressure 2 If the alarm indicator appears a signal sounds Stop the device This means that it has found a corner of the wood Mark the point with a pen Figur 1 Figur 2 Figur 3 3 Continue moving the device slo...

Page 4: ...Note the following 1 Shielded cables or wiring in metal casings cladding metal walls etc will not be detected 2 Proceed with caution when drilling screwing or cutting into wooden walls or floors which could contain cables and pipes just below the surface 3 Always switch off the power supply when working close to power cables 4 Depending on the distance from the electrical cable or pipe to the wall...

Reviews: