28 | English
Water 2062
Water 2062
English | 29
Correct location for installation
The radio signal of the sensor is highly
dependent on environmental conditions.
Metal objects, concrete surfaces, walls and
metallic wiring can also reduce the range.
The device can also be impaired by other
radio signals and environmental influences.
Check the function after installation.
Replacing the battery / reset button
To change the batteries or press the reset
button, the detector must be opened. To do
this, push the upper part of the sensor housing
upwards with slight pressure so that it detaches
from the base plate.
Resetting to factory settings
To reset the device to factory settings, press
and hold the reset button for at least 10
seconds.
IMPORTANT NOTE: The alarm can
only work as well as permitted by its
installation and environment.
The alarm can alert you of dangerous
situations but it cannot prevent them.
The device must not be painted, varnished
or altered in any way.
