22 | English
Water 2062
Water 2062
English | 23
Product description
The BURGsmart PROTECT Water 2062 alerts
you via push message or in combination with
the BURGsmart PROTECT Noise 2162 alarm
siren by signal if the sensor surfaces are short-
circuited by conductive liquids. Thanks to the
energy-saving processor, up to 4000 cycles
or up to 3 years can pass before the batteries
needs to be changed. The system informs you
about the current battery level in the app.
By linking with other BURGsmart PROTECT
components, you can create scenarios.
Tip: Use the cable length of the sensor to place
the detector higher and outside of water.
Note
: The detector is not waterproof and is
intended for indoor use. Warranty claims are
void in the event of improper use. 2.4 GHz
Wi-Fi and an internet connection are required.
Equipment features
• Wi-Fi water detector sensor
• Operation with 2x AA LR6 1.5V batteries,
up to 3 years of standby operation
• Installation without screws
• Compatible with 2.4 GHz Wi-Fi, standard
IEEE 802.11 b/g/n
• Configure smart scenes, for example, in
conjunction with the NOISE 2162 alarm
siren
• App operation, push notification in
case of alarm or low battery
• An internet connection is required
for operation
• Can be used alone or in conjunction with
BURGsmart PROTECT devices
